Edge Quality, Uncompromised
Fibre laser joins the KUTAVAR range as a full technology in its own right. The finest kerf and the cleanest edge — best used for cutting very high volumes of sheet metal when extreme precision, speed and intricate shapes are required.
New to the Range
Where finishing time is the real cost
A laser cut edge comes off the bed square, clean and effectively dross-free. For shops where finished parts currently go from the cutting bed to a linisher, a deburring machine or a bench, laser cutting removes that step.
- Laser power, 2–20 kW. *As standard.
- Near-zero kerf loss. Tighter nesting on sheet, which improves material yield.
- Very high traverse speeds. Rapid positioning between cuts, with speeds up to 120 m/min.
Specifications
The numbers
Indicative specifications for our standard laser range. Final figures are confirmed against your configuration at quotation.
| Cutting capacity — mild steel | Up to 50 mm |
| Cutting capacity — stainless | Up to 40 mm |
| Cutting capacity — aluminium | Up to 40 mm |
| Laser source | 2 – 20 kW fibre |
| Positioning accuracy | ± 0.02 mm |
| Max acceleration | 1.2 G |
| Rapid traverse | Up to 120 m/min |
| Cutting gases | Oxygen · nitrogen · compressed air |
Laser Bed Types
Specified to your needs
Our three standard laser bed models include a Fully Enclosed Machine, Gantry-enclosed Machine and an Exchange Table Machine.
01
Fully Enclosed Machine
02
Gantry-enclosed Machine
03
Exchange Table Machine
Applications
Where it earns its keep
Laser lends itself to customers who require maximum uptime, producing high volume mass-manufactured parts. Relying heavily on OEE (Overall Equipment Effectiveness) and SMED (Single Minute Exchange of Dies) to ensure the cost per part remains low.
- Precision sheet metal
- Enclosures & cabinets
- Electronics chassis
- Architectural metalwork
- Prototyping
- Automotive components
- Medical & instrumentation
- Subcontract laser profiling
Software
Built for laser cutting
KUTAVAR laser machines run dedicated laser CAD/CAM and control software, separate from the plasma and oxy-fuel platform. Talk to our team about your workflow and the files you work from.
Service & Support
Looked after for the life of the machine
Installation, operator training and servicing by KUTAVAR engineers, with laser consumables and wear parts dispatched from our Hereford stores.
01
Installation & training
Every machine is installed and commissioned by KUTAVAR engineers, with operator training delivered on site.
02
Servicing & maintenance
Planned servicing and breakdown support, including power source, chiller and assist gas systems.
03
Spares & consumables
Torch Assemblies, Nozzles, protective windows and wear parts, picked and dispatched from our Hereford stores.
Also in the range
Two more ways to cut
The same British engineering, applied to a different process.
CNC Plasma Cutting
Plasma Cutting
Fast, versatile cutting across mild steel, stainless and aluminium, driven by Hypertherm power sources.
CNC Oxy-Fuel Cutting
Oxy-Fuel Cutting
For heavy steel, where plate is thicker than plasma or laser can economically carry.
Book a Demo
See the machine and the software running, either via Zoom or in person at our Hereford HQ.
Build Yours
Configure your machine to exact specifications in under 60 seconds and we will come back with a quotation.
Order Consumables
Nozzles, electrodes, shields and wear parts for your machine, picked and dispatched from our Hereford stores.